M4-5A constant voltage RGBW 4 channels LED RF receiving controller
- Buy 100 for $25.90 each and save 4%
- Buy 300 for $24.90 each and save 7%
Made in Zhuhai, reliable quality with 5 years warranty, genuine version, not copycat
Direct from factory, good price
DC 5~24V safe low working voltage
M4-5A can work with M1/M2/M3/M4/M5/M6/M7/M8 M series RF control remote
7 preset colours, 6 bespoke colours
2 colour jumping modes - speed adjustable
2 colour smooth fading modes - speed adjustable
Receiver can learn the ID of a remote control
Max power output 240W
Can control up to 17m of our 12V RGBW LED strips
Each receiver can be paired with a remote control. To learn a new ID simply press the learn button (quick press) on the receiver, then any button on a remote. The receiver is then matched to that remote control. To cancel an ID press the learn button for 5 seconds.
The controller can control a total of 240 watts of LED strip running at 12V or 480 Watts of LED strip running at 24V. We recommend that the receiver can control up to 17m of our 12V RGBW LED strip.
Each 5 metres of LED strip must be connected in parallel with the colour controller not in series. If additional LED strip needs to be powered exceeding the above limits the introduction of an RGBW amplifier coupled with a power supply is required. An infinite amount of LED strip can be added to the circuit when using amplifiers.
M4-5A CV Receiving controller | |
Power input | DC5V-DC24V |
Max Current load | 5A ×4CH Max 20A |
Max Output power | 100W/240W/480W(5V/12V/24V) |
Compatible remote | M1/M2/M3/M4//M5/M6/M7/M8 |
Working Temp. | -30℃~55℃ |
Dimensions | L175×W44×H30(mm) |
Weight (N.W.) | 125g |