MiBoxer PIR1-ZB PIR Sensor (Zigbee 3.0)
- Buy 100 for $9.55 each and save 7%
• Product follow zigbee 3.0 standard protocol
• App Control, Smart Linkage
• Mobile Monitoring, Security Alert
• Scene Mode, Scene Linkage
Product Name: PIR Sensor (Zigbee 3.0)
Model No.: PIR1-ZB
Battery: CR123A 3V
Standby Power Consumption: 12μA
Detection Angle: 120°
Detection Distance: 7m
Wireless Standard: Zigbee 802.15.4
Zigbee Control Distance: 100m (open area)
IP Rate: IP54
Working Temperature: -10~40°C
Need to pair with MiBoxer or Tuya zigbee 3.0 gateway
Warning notice is sent automatically while sensor is low battery percentage
Motion detection support smart scene automation and intrusion warning
Strong magnetic mounting method
Support to set up ” hold time ” function when motion is detected
360° Flexible angle
Smart Linkage Create Better Life
Linkage control through Tuya app by matching MiBoxer lamps and controllers (Requires Zigbee 3.0 Gateway)
120° Wide Angle Detection
Sensitively identify heat changes and intelligently sense human movement
Abnormal Break-in Reminder Immediately
When the home is abnormally broken into after leaving home, the remote push reminder will be sent to the mobile phone(Requires Zigbee 3.0 Gateway)
Instructions For Use
1. Connect the mobile phone to the WiFi network in the 2.4GHz band, download "Tuya Smart" App and register / log in
2. Make sure that Zigbee gateway has been successfully configured and the product is within the effective network coverage of the gateway.
3. Open the "Tuya Smart" app, touch Add Sub-Device on the "Smart Gateway" page, and follow the app instruction to add devices.
4. Unscrew the back cover counterclockwise, install the battery and power on, press and hold the "SET" button for 5 seconds to enter the network distribution state, at this time the indicator flashes, wait for the network to succeed.
Desktop Placement
Wall Mount
